Jual Globe valve

Globe valve offers T type body by default with rising stem and hand wheel. It blocks the flow of pipeline through the rotation and lifting of hand wheel as well as stem to drive the lift of disc. The globe valve has the feature of long service lift since there is no relative friction between disc and body sealing surface.

Bolted bonnet, pressure bonnet, bellow seal bonnet, high/low temperature extended bonnet and ISO 15848 fugitive emission designed valves are available upon different request of services. (Wiki)

Types of Globe Valve

Globe valves are available in the following designs

Specification of Globe Valve

Nominal Sizes NPS 2 to NPS 24
Class 150 to Class 2500

Design & manufacture according to API 600, API 603, ASME B16.34
Face-to-face according to ASME B16.10
End Connection according to ASME B16.5 (RF & RTJ), ASME B16.25 (BW)
Test & inspection according to API 598
Also available per NACE MR-0175, NACE MR-0103, ISO 15848, API624

Cast Iron
Ductile Iron
Titanium
Duplex
Stainless Steel
Carbon Steel
Stainless Steel
Aluminium
Bronze
Brass

Cooling water systems where flow needs to be regulated
Fuel oil system where flow is regulated and leaktightness is of importance
High-point vents and low-point drains when leaktightness and safety are major considerations
Feedwater, chemical feed, condenser air extraction, and extraction drain systems
Boiler vents and drains, main steam vents and drains, and heater drains
Turbine seals and drains
Turbine lube oil system and others