
Globe Valve
Globe valve offers T type body by default with rising stem and hand wheel. It blocks the flow of pipeline through the rotation and lifting of hand wheel as well as stem to drive the lift of disc. The globe valve has the feature of long service lift since there is no relative friction between disc and body sealing surface.
Bolted bonnet, pressure bonnet, bellow seal bonnet, high/low temperature extended bonnet and ISO 15848 fugitive emission designed valves are available upon different request of services
Types of Globe Valve
Globe valves are available in the following designs



Specification of Globe Valve
Nominal Sizes NPS 2 to NPS 24 |
Class 150 to Class 2500 |
Design & manufacture according to API 600, API 603, ASME B16.34 |
Face-to-face according to ASME B16.10 |
End Connection according to ASME B16.5 (RF & RTJ), ASME B16.25 (BW) |
Test & inspection according to API 598 |
Also available per NACE MR-0175, NACE MR-0103, ISO 15848, API624 |
Cast Iron | Ductile Iron | Titanium | Duplex Stainless Steel |
Carbon Steel | Stainless Steel | Aluminium |
Cooling water systems where flow needs to be regulated |
Fuel oil system where flow is regulated and leaktightness is of importance |
High-point vents and low-point drains when leaktightness and safety are major considerations |
Feedwater, chemical feed, condenser air extraction, and extraction drain systems |
Boiler vents and drains, main steam vents and drains, and heater drains |
Turbine seals and drains |
Turbine lube oil system and others |