Jual Motor Operated Valve (MOV)

Jual Motor Operated Valve (MOV) Murah, Distributor Motor Operated Valve (MOV), Valve FBV, Beli Motor Operated Valve (MOV) Harga Murah Berkualitas, FBV Indonesia, FBV Cilegon, Valve Europa, Valve Germany, Valve Japan, Valve China, Valve USA, Valve UKV, Burkert, Carbon Steel, Stainless Steel, Manual Valve, Supplier Motor Operated Valve (MOV), Valve Spain, ANSI 150, Ansi 300, ANSI 600, Class 800, Class 1500, Jual Motor Operated Valve (MOV) Indonesia, Cilegon, Jakarta, Surabaya, Karawang, Bekasi, Palembang, Banten, Serang, Tanggerang, Bandung, Bogor, Sidoarjo, Bali, Gorontalo, Jambi, Kalimantan, Sulawesi, Jawa Barat, Aceh, Valve A105, Valve High Pressure, Forged Steel Valve, Forged Steel Steam, Forged Steel class 800, Forged Steel Class 1500, Forged Steel Class 2500, Forged Steel High Pressure, Forged Steel High Temperature, Steam Valve, Valve Kalimantan, Valve Kalsel, Valve Balikpapan, Valve Lining, Valve Lining PTFE, Valve Lining PFA, PFA Lining, PTFE Lining, Valve Chemical, Valve Corosive, Vamein PTFE, Vamein PFA, Vamein Valve, Vamein SPAIN, Vamein Indonesia, Vamein Jakarta, Vamein cilegon, Vamein Surabaya, Vamein Kalimantan, Vamein Medan, Spesial Valve


The Motor Operated Valves (MOV) family of valves are an important item of Plant & Piping system. These valves are generally of large size and are used for different applications such as pump discharge etc. Motor Operated Valves are often called as On-Off valves as the motors serve the purpose of fully opening or fully closing valves in pipelines. For example, cooling water lines, process pipelines where regulation of fluid is not required, motor operated valves can be used to fully allow or fully stop the fluid flow. These valves are not used for throttling or precise control / regulation purposes as they serve mainly On-Off service application.

Manufactured sizes NPS 1/4″ thru NPS 88″
Pressure ratings ANSI 150#, ANSI 300#, ANSI 600#, ANSI 900#, ANSI 1500#, ANSI 2500#, ANSI 4500#
Valve connections ASME B16.5 (FF, RF, RTJ, Threaded), ASME B16.47 Series A or B, MSS SP-44, ASME B16.25 (BW, SW, WE)
Standardization API 6D / ISO 14313, ASME B16.34, BS 5351, API 608, BS EN ISO 17292, BS 1873, API 6FA, BS 6755 Part 2, ASME B16.10, API 598, GOST, JIS, NACE 01-MR-0175
Body ASTM A216, A105, A350, A182, A351, A352, A890, A995, C95300, C95800, MONEL, INCONEL
Trim ASTM A216, A105, A350, A182, A351, A352, A890, A995, C95300, C95800, MONEL, INCONEL
Seat(s) PTFE, NYLON, PEEK, NBR, KELF, ENP (Electroless nickel plating), HC (Hard chrome), TC (Tungsted carbide)
Sealing BUNA-N, EPDM, VITON, Flexible graphite, FKM, HNBR, Nitrile, Neoprene
  • Open/close valves – used to automate manual open close valves Examples include, pump discharge / suction valves, boiler feed water isolation valves, drum vent valves, product line valves etc.
  • Inching valves – used were some degree of control. Example a gradual opening and closing is required, applications include, reflux lines, boiler start up vent, boiler IBD valves, boiler main steam valves etc.
  • Precision flow valves – this is a precision inching valve, in inching valve the motor operates in steps configured in the controller, e.g. 5%, 10% opening steps. In precision flow valves, a continuous control is enabled by the use of proper feedback from the field to the controller which is not usually found in other motor operated valves. An example is steam injection valve / water injection valves used in GT for Nox control.

Home / Contact UsBrandAbout Us